|
El inventor de este proceso llamado Xerografía (del Griego Xeros "seco" y Grafos "dibujo o imagen"), fue Chester Floyd Carlson, quién en 1931 descubrió un material fotosensible que se cargaba de electricidad estática sólo en las zonas expuestas a la luz, lo que luego de varios experimentos dio origen a la primer fotocopiadora la Xerox 914 por parte de la empresa "Haloid", actualmente "Xerox Corporation".
==How a photocopier works (using xerography)==
{{main|Xerography}}
[[Image:Xerographic photocopy process en.svg|thumb|left|220px|Schematic overview of the xerographic photocopying process (step 1-4)]]
#'''Charging''': The surface of a cylindrical drum is electrostatically charged by either a high voltage wire called a corona wire or a charge roller. The drum has a coating of a [[photoconductive]] material. A photoconductor is a [[semiconductor]] that becomes conductive when exposed to light[http://encarta.msn.com/dictionary_/photoconductor.html].
#'''Exposure''': A bright lamp illuminates the original document, and the white areas of the original document reflect the light onto the surface of the photoconductive drum. The areas of the drum that are exposed to light (those areas that correspond to white areas of the original document) become conductive and therefore discharge to ground. The area of the drum not exposed to light (those areas that correspond to black portions of the original document) remain negatively charged. The result is a latent electrical image on the surface of the drum. (In digital machines, the original document is scanned and digitized and a laser is employed to discharge the drum in a similar fashion)
#'''Developing''': The toner is positively charged. When it is applied to the drum to develop the image, it is attracted and sticks to the areas that are negatively charged (black areas), just as paper sticks to a toy balloon with a static charge.
#'''Transfer''': The resulting toner image on the surface of the drum is transferred from the drum onto a piece of paper with a higher negative charge than the drum.
#'''Fusing''': The toner is melted and bonded to the paper by heat and pressure rollers.
#'''Cleaning''': The drum is wiped clean with a rubber blade and completely discharged by light.
This example is of a negatively charged drum and paper, and positively charged toner as is common in today's digital copiers. Some copiers, mostly older analog copiers, employ a positively charged drum and paper, and negatively charged toner.
== Enlaces externos ==
| 